Huawei recently launched the P30 Series of phones and it was presumed that the company will now be focussing on the next flagship, the Huawe...
Huawei recently launched the P30 Series of phones and it was presumed that the company will now be focussing on the next flagship, the Huawei Mate 30 Series. A report from a Chinese media outlet has now come up with the first lot of information. It claims that the Huawei Mate 30 Pro will come with a quad camera setup on the back, a massive 6.7-inch display, a 55W quick charging tech and may only launch with the support of only 4G and 5G networks.
The report has multiple images embedded showing different designs. While some images show a waterdrop notch, some are seen with a punch-hole design. Moreover, the images which show the phone with a punch-hole design are not exactly the same. In one image, the punch hole is seen in the top left corner, while in other, the cut-out for the front camera is centrally-located.
The phone is said to come with a 6.71-inch OLED display supplied by BOE. Reportedly, the display will be curved from all four sides, but its other details like screen resolution are not available yet. Further, the report says that the Huawei Mate 30 Pro is expected to arrive with an in-display fingerprint reader. There is no information on whether the phone will have Face Unlock.
In case of camera setup, the report says that the phone will come with four cameras on the back. These camera are said to be put in the same array as in the Huawei Mate 20 Pro. The square array is said to have a camera in each of the four corner and an LED flash in the centre. The configurations of the four sensors are not known yet, however, the report says that the setup will be equipped with a 3D ToF sensor.
The battery of the Mate 30 Pro is said to hold 4,200mAh capacity and is expected to carry support for 55W SuperCharge technology, that is already available on the Huawei Mate X foldable device. Reportedly, the Mate 30 Pro will also carry support for 10W reverse wireless charging.
Under the hood, the phone is said to feature HiSilicon Kirin 985 processor with Balong 5000 chip. The report says that the phone will only launch with support for 4G and 5G networks. This doesn’t sound correct because Huawei had announced that the Balong 5000 supports 2G, 3G, 4G and 5G on a single chip.
Earlier this year, a report claimed that Huawei has already started to test the phone powered by the flagship SoC. Huawei’s HiSilicon Kirin 985 chipset is said to be manufactured with a 5G modem, using Taiwan Semiconductor Manufacturing Company's (TSMC's) new 7nm fabrication process. It is expected to go into mass production from the third quarter of this year. TSMC will use 7nm Extreme UltraViolet (EUV) process (called N7+), along with the Flip-Chip Package-on-Package (FC-PoP) process.
A combination of EUV (which increases the accuracy of transistor placement) and FC-PoP (which allows vertical stacking of transistors) manufacturing processes means that the transistor density on the chip will be increased by 20 percent, resulting in better performance and lower energy consumption.
from Latest Technology News http://bit.ly/2VHnkaD
COMMENTS